How to fix LG K10 hang in logo and Bypass Google Account Remove Frp Delete Password and Pattern Lock Fix any Software
Many LG K10 users , are having difficulties at boot and claim that it stays stuck in the logo or constantly restarts. This problem usually happens in all models and compilations of LG K10 and is due to firmware failures caused by poor execution of Root procedure, incorrect installation of a firmware or custom Recovery, applications from unknown sources and others. If you are going through this problem and want to put an end to the situation, then you have reached the right place. Keep reading carefully to learn how to solve LG K10 stays in the logo or constantly restarts.
Affected Models
LG-LGK430DS
LG-K430DSF
LG-K430DSY
LG-K430TV
LG-K420N
LG-K428SG
LG-K430AR
LG-LGK430N
LG-LGK430T
LG-LGK430Y
Requirements
1) First of all, your LG K10 must have a minimum battery percentage of 80%. This is essential to perform the entire firmware installation , preventing the device from turning off during the procedure.
My LG K10 does not pass the logo
2) Secondly, they must download the KDZ (firmware) corresponding to the model number of their device. If you do not know which model, you can remove the back cover and check the model number that is near the battery. To download the firmware, you must go to the following website: lg-kdz-firmware.com
3) You must download and install the LG K10 USB Drivers on your PC.
4) Download LG Flash Tool and extract it on the desktop of your PC.
5) It is recommended to use the original USB cable of your device to facilitate the recognition of the device.
6) Download Firmware lg k10
Note: To enter Download Mode or S / W Mode on your LG K10, you must press the volume button up for 5 seconds and then connect it to the PC. When they do, the S / W Mode screen will automatically appear.
That was it. Remember that if you have questions or queries, you can leave a comment in the section below.