How to remove Prenormal rmm J600G U3+Root and Imei

Share this post with friends!

How to remove Prenormal rmm J600G U3 + Root and Imei

Take out rmm j600g bit 3
Tutorial to remove rmm j600g bit 3 to later root and repair imei.

Steps rmm j600g bit 3

First pass combination, there will activate oem this is very important because if it is the first time that you pass combination and activates oem you can do it.

samsung j600g combination file firmware

Once the oem is activated in combination you will pass the full flash the will format as soon as the flash finishes

There is the key moment you have to force it to enter download mode again and it will no longer have prenormal

eye if you let it turn on you will lose the opportunity of the prenormal and will have to wait 7 to 10 days

Be careful if you put it in download mode and it says

Remove Prenormal rmm, Root and Imei J600G u3

prenormal state
Frp state off
Oem state on
You will have to pass
Combination
And it will activate the oem
But it will continue with prenormal since you tried to work it before so I tell you that not all come out

The solution to this is to leave it already flash with the oem activated and it will take about 10 days and there you will put it back in download mode and if it will

After this pass the twrp
You do a hard reset
then install the RMM-State_Bypass_Mesa
then the no-verity-no-encrypt_ashyx
and finally the root

eye if the prenormal comes out but the oem is off and the frp off has to wait about 7 to 10 days and from there the oem will appear in the developer options and the prenormal will no longer come out
thank you please

You already know if you have an account or pattern, pass one of the combination and activate oem and they will be left without prenormal this happens because the equipment is being used more than 7 continuous days but if you format it and then you pass the combination the prenormal will be activated and you will have to wait the days

VERY IMPORTANT JUST THE ARRIVAL THE EQUIPMENT MUST PUT IT IN THE DOWNLOADING
SYSTEM STATUS MODE : CUSTOM
FRP LOCK: ON
OEM LOCK: ON
IF IT SAYS SO THEY CAN PASS IT WITHOUT PROBLEMS
THERE THEY COMBINATION AND THEY ACTIVATE OEM PASS SOFTWARE AND JUST FINISH TO FORMATE GET IT ON AND READY GET RID OF PRENORMAL RMM

BUT IF IT SAYS
SYSTEM STATUS: CUSTOM
RMM STATE: PRENORMAL
FRP LOCK: OFF
OEM LOCK: ON
THE COMBINATION WILL PASS THEY WILL ALLOW YOU TO ACTIVATE THE OEM BUT IT WILL NOT REMOVE THE PRENORMAL BECAUSE THE TEAM REMOVED YOUR ACCOUNT AND AT THE TIME OF FORMAT IS THAT THE PRENORMAL IS ACTIVATED IN THIS CASE YOU HAVE TO WAIT ABOUT 7 TO 10 DAYS THE EQUIPMENT IN USE I
HOPE YOU PLEASE GIVE THEM PLEASE I LEAVE YOU THE LINK OF THE VIDEO SO THAT THEY SEE THAT IF IT REPAIRS AND PATCHES AND ALL OK
THIS IS THE FLASH

J600GDXU3ARI7_J600GODM3ARJ2_INS

AND THE COMBINATION EAST

COMBINATION_FAC_FA80_J600GDXU3ARH5

Twrp
RMM Bypass
Magick

0 thoughts

Leave a Reply